top of page
Vis de transfert des grains Astréïa

Transfer screw between the grain brush and the Astréïa mills

An option which makes it possible to make the link between the grain brush Astréïa and the Astreia Mills. 

The transfer screw thus makes it possible to carry out a complete installation between the grain brush and the production of the flour on our Mills. 

It is a worm screw with two modes of operation: 

• "Basic" version: The auger plugs into a 16A three-phase socket and has manual on/off operation controlled by an on/off button .

• "Automatic" version: The grain auger is connected to a three-phase socket and also to the grain brush via a specific connector. A low level sensor is inserted into the hopper to be filled with brushed grain. Operation is then 100% automatic and autonomous.

We recommend that you consult our catalog which explains in detail the advantages of this Astréïa product.

There are two versions of the Vis.
A version if you have the brush and the grinder at the same level
and a version if the brush and the grinder are arranged on 2 different levels

All our products are designed on our farm in the Hérault in France, are then designed by our in-house design office, then manufactured by our

companions without spot cutting.



2 operations to choose between automatic and manual. Do not hesitate to consult ourcatalog for all technical elements


We thought of 2 versions: a long and a short depending on the installation of your mill. If your grinder is on the ground or if it is raised on a platform.


Depending on your choice of pack and lengths: 

short dimension of 120cm (180cm in all)

long dimension of 200cm (280cm in all)

bottom of page